Name: China 6.6kV Soft Starter Manufacturers Suppliers Factory - Customized 6.6kV Soft Starter - RENLE
Brand: RENLE
SKU: 281625119

Product Introduction

The 6.6 kV soft starter is a solid-state, medium-voltage device designed for three-phase induction motors. It controls motor acceleration, deceleration, and protection by adjusting the output voltage through thyristor conduction angle regulation. This enables smooth starting and stopping operations, greatly reducing inrush current to the power supply and decreasing mechanical stress on driven equipment and couplings. As a result, electrical grid disturbances are minimized, and mechanical components are protected from shock loads.

Medium-voltage systems are inherently complex-your starter shouldn't complicate them further. RENLE's RNMV-EI medium-voltage soft starter simplifies operation with user-friendly features such as plain-language diagnostics, eliminating the need for code deciphering. Built-in monitoring, status indicators, and comprehensive I/O options save space and reduce auxiliary costs, while also speeding up commissioning. Real-time motor performance curves and current readings offer clear visibility into operating conditions. With intuitive feedback in everyday language, the RNMV-EI enables straightforward starting control-no manual decoding required.

Rated voltage: 3kV/3.3kV/4.16kV/

6kV/6.6kV/10kV/

11kV/13.8kV

Rated power:

250kW-15000kW;

Starting current: Adjustable range 1.5-5 times;

Adopt serial thyristor valve group and dual power supply trigger technology;

Products advantages

01.

5G Industrial Ethernet & Cloud Connectivity

This system leverages 5G industrial Ethernet combined with a cloud platform to deliver comprehensive remote technical support for field equipment. It enables a complete operational cycle, from data acquisition and waveform display to remote diagnostics and software updates.

02.

Multi-Protocol Communication Support

The starter offers extensive connectivity options, supporting protocols including Modbus RTU, Modbus TCP, and PROFIBUS DP. Multiple reserved interfaces facilitate easy parameter configuration and real-time data monitoring. Additionally, with dedicated software tools, users can perform remote waveform analysis, data downloads via FTP/TFTP, and seamless software upgrades.

Operation Panel Description

This 6.6kV Soft Starter series of Intelligent high-voltage solid-state soft starting cabinets use PLC andHMI (Human-Machine Interface, refer to touchscreen) as peripheral application extensions,PLC as peripheral terminal function extensions, and HMI as Intelligent high-voltage solid and state soft starting cabinet status monitoring and parameter modification.

Main screen

Function Overview

The 6.6kV Soft Starter main components include:

one HMI

one DC24V Power Supply

one vacuumcontactor for bypass

three CT

three voltage sensors

main controller

power modul

Function Items	Function Description
Start Up	Constant Current
Start Up	Current ramp
Stop	Coast to stop
Stop	Soft stop
Protect	Zero sequence overcurrent protection
	Component overheat protection
	Grounding protection
	Undervoltage protection
	Transient ovecurrent
	Time limit current (start-up)
	Output open-phase
	Trigger board power protection
	RC Current Protection
	SCR Overvoltage trigger protection
I/O	Programmable input (10)
AQ	Programmable analog output (1)
Communication	One Modbus_RTU/PROFIBUS_DP (RS485)
	One Modbus_TCP/IP (RJ45)
	CAN Bus
	One Modbus_RTU (RS485) used to connect the HMI of the cabinet

Medium voltage Starter Selection Table

Valve group current (A)	Voltage (kV)	Max. power of universal motor (kW)	Specifications	Cabinet dimensions (H×W×D,mm)	Weight (t)
150	3	630	RNMV-030150	23008001500	0.7
150	3.3	650	RNMV-033150	23008001500	0.7
150	6	1250	RNMV-060150	23008001500	0.7
150	6.6	1350	RNMV-066150	23008001500	0.7
150	10	2000	RNMV-100150	23008001500	0.75
150	11	2240	RNMV-110150	23008001500	0.75
330	3	1350	RNMV-030330	230010001500	0.78
330	3.3	1500	RNMV-033330	230010001500	0.78
330	6	2700	RNMV-060330	230010001500	0.8
330	6.6	3000	RNMV-066330	230010001500	0.8
330	10	4500	RNMV-100330	230010001500	0.8
330	11	5000	RNMV-110330	230010001500	0.8
500	3	2000	RNMV-030500	230011001500	0.85
500	3.3	2240	RNMV-033500	230011001500	0.85
500	6	4000	RNMV-060500	230011001500	0.85
500	6.6	4500	RNMV-066500	230011001500	0.85
500	10	6800	RNMV-100500	230011001500	1
500	11	7600	RNMV-110500	230011001500	1
700	3	2800	RNMV-030700	230012001500	1
700	3.3	3150	RNMV-033700	230012001500	1
700	6	5800	RNMV-060700	230012001500	1.2
700	6.6	6300	RNMV-066700	230012001500	1.2
700	10	9600	RNMV-100700	230012001500	1.25
700	11	10000	RNMV-110700	230012001500	1.25
1000	3	4000	RNMV-0301000	230014001500	1.5
1000	3.3	4500	RNMV-0331000	230014001500	1.5
1000	6	8200	RNMV-0601000	230014001500	1.8
1000	6.6	9100	RNMV-0661000	230014001500	1.8
1000	10	13500	RNMV-1001000	230014001500	1.8
1000	11	15000	RNMV-1101000	230014001500	1.8

Technical Parameters

Data Name	Working Range
Frequency	50Hz/60Hz±2Hz(selected according to user's grid)
Overload capacity	400% control nominal value 60s
Overload capacity	500% control nominal value 30s
Applicable motor	Three-phase squirrel-cage asynchronous and synchronous motor

Application environment
Temperature	Cabinet temperature 0°C~40°C, (Heater is optional for -20°C~0°C)
Humidity	5%~95% relative humidity
Altitude	Below 2000m. Derating is necessary for altitude above 2000m.
Place	Indoors, no explosive or corrosive gas, with low dust
Cooling	Natural cooling

Structural features
Protection level	IP4X
Operation power supply	2kVA AC220V supplied by the user (can be specified).
Main circuit	The number of thyristors is determined by the model.
Communication protocol	Integrated Modbus RTU, Modbus TCP, CAN and PROFIBUS DP communication protocols, equipped with interface.
Communication interface	RJ45
Operation interface	7-inch touch screen (HMI) which monitors system status in real-time. Used for setting and modifying parameters.
Event record	It can continuously record events and historical curves with time and date stamps within 10 days.
Performance monitoring	Current, voltage, power factor, module temperature, RC average and peak voltage, RC current, etc.
Input and output options	10 channels of 24VDC programmable inputs, 2 channels of 16A and 4 channels of 5A programmable outputs, 1 analog programmable output (4~20mA).
User management	Multi-level user password protection (can be specified).
Interface language	Chinese, English, Russian (can be specified)
Thyristor	Thyristor valve group in series
Drive and data	Dual power supply triggering, optical fiber communication multiplexing technology;
	Adopting synchronous phase-locked loop, three-phase conduction compensation algorithm;
	Equipped with OBD and software double overvoltage function;
	After startup is completed, the valve group limit data are counted for evaluating the system status.
Monitoring	HMI window, used for real-time monitoring of system status, collection of valve group data and setting and modification of control parameters.
Protection	Undervoltage, overvoltage, phase loss, overheating, abnormal voltage sharing, abnormal RC current, thyristor failure, optical fiber communication interruption, abnormal triggering power supply etc.
Cloud service	Remote software update, commissioning, data waveform monitoring and fault analysis is realized through InterNet;
	After connecting to the cloud server through industrial Ethernet + 5G, the soft starter provides data for big data analysis and related AI algorithms;
	makes full use of the computing power of the cloud platform to realize online analysis and diagnosis of motor operating status, and realizes fault pre-warning and optimized control.
Cabinet color	Selected by the user.

Start data
Starting current	Adjustable within 4 times of the rated current of the motor.
Starting time	Adjustable within 10~60 seconds.
Number of starts	6 times per hour at an ambient temperature of 25°C.
Starting interval	No less than 5 minutes between two starts.

Protection parameters
Transient overcurrent	Protection range 200%~800%
Inverse time overcurrent	The protection time is 1 minute for 1.5 times, used for protecting the motor during bypass operation.
Incoming line undervoltage	Range: 0%~100%
Grounding	Ground protection is identified by zero-sequence current.
Output phase loss	Set the threshold 1.0%~50% according to the parameters by comparison of the three-phase output current.
Thyristor breakdown	Set action threshold through parameters by monitoring voltage of each level of thyristors.
RC current	Monitor RC current of each level of thyristors and identity RC working status. Current deviation can be set.
Trigger failure	During startup, the number of triggering failure exceeds the set parameter value within 2 seconds of detection window, so protection acts.
Start timeout	The start time exceeds the set value.
Triggering power	If the power of the triggering board is lower or higher than the hardware protection value, protection of triggering board power acts.
Temperature	SCR temperature exceeds the set parameters.
Thyristor overvoltage	During the starting process, each level of SCR is equipped with OBD protection. During one starting process, the number of overvoltage automatic triggering reaches the set parameter, the protection is performed.

Hot Tags: 6.6kv soft starter, China 6.6kv soft starter manufacturers, suppliers, factory, Medium Voltage Solid State Starter, 6.6 kv soft starter, 3 phase soft starter, 4160v motor starter, vfd starter for motor, aircon soft starter